KYOCERA 221 Manuel

Preparations1-2Operation Panel1 System Menu/Counter key — Press this key when you want to set the network address, the date/time, and the time differe

Preparations1-3AccessoriesPrior to using the scanner for the first time, verify that the following accessories are included with this product.• 1 CD-R

Preparations1-4

2-12 Set-upSetting up the scannerOutline and network configurationExample of transmission modes for data scanned using the Scan System and the require

Set-up2-2Connecting the scanner to your computer network1Turn the main switch located on the right side of the scanner OFF.Caution ALWAYS turn the mai

Set-up2-3Network (TCP/IP) settingsThis section explains the procedures to set the network address for the scanner.Notes • The network address that sho

Set-up2-48In the same manner, set Subnet for subnet mask and Gateway for gateway addresses.9Once it is complete to enter all network addresses and ret

Set-up2-5Note Set the time difference and then the date and time.6After completing the settings, move D to select End and press the Enter key. The set

Set-up2-6Setting up the scanner softwareSystem requirementsInstalling the softwareThere are three main functions available with this network scanner.

Set-up2-7Installing the utilitiesThe following utilities are contained on the CD-ROM that is included with this product.Note Refer to the On-Line Manu

This Operation Guide mentions that 181 is a 18 ppm (prints per minute) machine and 221 is a 22 ppm (prints per minute) machine.Note This Operation Gui

Set-up2-8Installing the TWAIN sourceIn order to scan originals using PaperPort, TWAIN Source must be installed PRIOR to installing the PaperPort appli

3-13 Performing the Required Operation at the ScannerScanning under the Scan to PC and Send E-mail functionsBefore using the Scan to PC functionWhen p

Performing the Required Operation at the Scanner3-24Use the S and T keys to move D to select the desired destination. An item can be selected from Sen

Performing the Required Operation at the Scanner3-35Finally move D to select 1 End and press the Enter key. The scanner setting screen will appear. Se

Performing the Required Operation at the Scanner3-4Scanning with TWAINThe following explains the settings that need to be made in the scanner in order

Performing the Required Operation at the Scanner3-5When performing the scanning operation at your computer1Run the TWAIN Source in the corresponding a

Performing the Required Operation at the Scanner3-6Scan settingThe scan setting screen is displayed when scanning originals. To carry out the various

Performing the Required Operation at the Scanner3-71After completing the setting, display the scan setting screen.2Set the original.3Press the Start k

Performing the Required Operation at the Scanner3-8

MEMO

iTrademark Information• Microsoft, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft Corporation of America and other c

E1

First edition 2009.3Printed in China 303JR56010

iiAbout this Operation GuideThis Operation Guide is meant to be read when the Scanner Interface Card is installed and your copier is to be used as a n

iiiImportant:The use of scanned legally copyrighted materials, such as documents, musical scores, pictures, woodblock prints, maps, drawings and photo

ivGetting connectedThe following procedures are required in order to use this machine as a scanner.Connect the scanner to your computer<Example con

vTable of contents1 Preparations ... 1-1Names of parts

vi

1-11 PreparationsNames of partsMain body1 Original cover — Open and close this cover when setting an original on the platen.2Platen — Set the original