KYOCERA FS-680 Manuel d'utilisateur télécharger pdf (Page 132)

Appendix C Host Computer Interface

C-15

Connecting the Printer to the Computer

1. Check that the power of both the printer and computer is switched off.

2. Discharge yourself by touching a metal object such as a doorknob.

3. Remove the plastic cap from the printers RS-232C interface connector.

4. Plug the printer end of the RS-232C interface cable into the printers RS-232C connector and

screw it in place.

5. Plug the other end of the cable into the computers RS-232C interface connector.

6. Switch on the printers power.

7. The printers RS-232C parameters are factory-set to the following values:

Baud rate=9600 bps, Data bits (character length)=8 bits,

Stop bits=1, Parity=None

The three RS-232C protocols are XON/XOFF and DTR. The printer performs all three of them

simultaneously, using positive logic for DTR.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 140 141

Pas de commentaire

KYOCERA FS-680 Manuel d'utilisateur Page 132